The instrument adopts compact design, easy to operate, adopts the principle of transmitted light measurement, can measure the turbidity in any place, not affected by the external light, the controller adopts waterproof structure, the sensor is strong, waterproof, rapid response, widely used in river management, factory drainage, water treatment plant, sewage treatment plant and other occasions of turbidity measurement.

Technical indicators

　　I. Measuring method: transmittance type;

　　II. Measuring range: 0.0~500NTU;

　　III. Resolution: 0.1 (0.0~99.9NTU) 1 degree (100~500NTU);

　　IV. Repeatability accuracy: ±5% (water temperature: 20℃);

　　V. Calibration: clear water calibration;

　　VI. Correction: 1-point correction and 2-point correction;

　　VII. Power supply: 9V alkaline battery (6LR61) * 1 section;

　　VIII. Use time: number of measurements: about 8000 times;

　　Nine, the measurement temperature: 0 ~ 40 ℃;

　　Ten, the main material:

　　1) Controller: ABS, PMMA;

　　2) Sensor: SUS316L (rubber outer skin for protection: silicone rubber);

　　XI. Cable length: 5 meters;

　　XII.Dimensions:

　　1) Controller: H*W*D=160*44*42mm

　　2) Sensor: about Φ30*116mm;

　　XIII. Weight: about 600g (including battery);

　　XIV.Protection level:

　　1) Controller: waterproof (IP67)

　　2) Sensor section: within 2m water depth (IP68).

Main features

　　1. Measurement in any place: the weight is only 600g lightweight type, in any place can measure turbidity, not affected by the external light, also not affected by the weather and day and night can be measured;

　　2. Functionally simple measurement: the sensor is placed directly into the water and the turbidity value can be measured directly by pressing the measurement button;

　　3. Design: compact design, easy to operate.