Main Features

　　5000B-JK multi-parameter online water quality analyzer, can simultaneously measure: conductivity (electrode type), PH, temperature, residual chlorine (imported electrode), turbidity (with automatic cleaning function) five parameters. Each channel is independent of each other, no switch conversion, no interference.

Technical indicators

　　I. Conductivity:

　　(1) Measuring range: (0.1 ~ 300) μS / cm; (0.1 electrode); (1.0 ~ 3000) μS / cm; ( 1.0 electrode); (10 ~ 30000) μS / cm; (10.0 electrode).

　　2) Measuring temperature: 0～99.9℃.

　　3) Accuracy: ±0.5%FS, ±0.5℃.

　　II. pH:

　　1) Measuring range: (0.00 ~ 14.00) pH.

　　2) Basic error of electronic unit: ± 0.02pH.

　　3) Basic error of the instrument: ± 0.05pH, ± 0.5℃.

　　III. Temperature:

　　(1) Measuring range: (0.0~100.0)℃.

　　(2) Basic error of the instrument: ± 0.5℃ (0.0℃≤ T≤ 60.0℃); other ranges: ± 1.0℃.

　　IV. Residual chlorine:

　　(1) Range: (0~5) mg/L;

　　(2) Resolution: 0.01mg/L;

　　3）Repeatability: ±2%.

　　V. Turbidity:

　　(1) range: (0 ~ 100) NTU, (0 ~ 500) NTU, (0 ~ 1000) NTU, (0 ~ 3000) NTU; different ranges with different sensors, please specify the measurement range when ordering; greater than 3000NTU, please select the 5000C multi-parameter online water quality analyzer.

　　2）Accuracy: ±10%.

　　(3) sensor with automatic cleaning function, cleaning scraper and sensor integrated type does not require peripheral components.

　　Sixth, the channels are independent of each other, the data of each channel is measured at the same time.

　　Seven, conductivity, pH, temperature, residual chlorine, turbidity with the screen display.

　　Eight, the current isolated output: each parameter independent 4 ~ 20 mA (load < 750 Ω).

　　Nine, power supply: AC220V ± 22V, 50Hz ± 1Hz, optional DC24V ± 2.4V.

　　X. RS485 communication interface (optional).

　　XI, protection grade: IP65.

　　XII, working conditions: ambient temperature 0 ~ 60 ℃, relative humidity ≤ 90 ℅.